Tips and Tutorials...

Stitch and Flip Triangles…

I am working on a quilt and pattern to share with you all once its written and tested by a very generous volunteer. The Pattern Writing Series put on by Cheryl from Meadow Mist Designs is really, really good. Its a nice place to start if you have no idea what to do or where to go.

Pattern Writing Blog Series

Here is a little tutorial I have put together on the stitch and flip technique used for sewing up the Snowball blocks in the pattern.

Step 1: Place 1 piece of background fabric cut for the Snowball block on your design board. Place 4 pieces of main color fabric and/or background fabric in corners of Snowball. I like to iron the corner pieces into triangles by folding the square (wrong sides together) and pressing. I then open the folded triangle and press again. You will not have to mark the diagonal now as you will just sew along the pressed line.

Step 2: Sew each corner piece along the pressed line. You can use leaders and enders here (in this case I used the cut-off portion from previous snowball blocks) when starting and stopping sewing.

Step 3: Press to set the 4 corner seams. Trim the seam-allowance to 1/4 inch. Repeat for all 4 corners.

Step 4: Finger press the seam out, and then press with your iron. And voila, a Snowball block is born!

Weekly sewing round-up:

  • another Geranium dress
  • minimini rainbow quilt
  • another dress no. 1 from 100 Acts of Sewing
  • another section of my Snowball Nine Patch quilt

Cheers,

Amanda

Advertisements

6 thoughts on “Stitch and Flip Triangles…

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s